您好,官网上有关AD7992的软件代码及系统需求您可先参考下
Hi ,
Can you share scope shots of the digital signals. You may also check ADI wiki page, for example of the AD799x family Linux driver for your reference. Please refer to the link AD7998 IIO ADC Linux Driver [Analog Devices Wiki]
Regards,
Jonath…
For the AD7997 / AD7998 If the ALERT/BUSY functionality is not being used can the ALERT/BUSY pin be left float or must it be tied high or low? I see guidance here to tie the CONVST pin low if it will not be used but do not see anything specific to ALERT…
Hi Pretourian
here is some reference material on noise in general
http://www.analog.com/static/imported-files/tech_articles/MS-2022.pdf
http://www.analog.com/library/analogDialogue/archives/40-02/adc_noise.html
If you have specific issues with your…
Hi All
As a last resort, I looked to another IC.
I have soldered the AD7998-0 ADC to a breakout board.
Hello,
In attempt to implement peak detection I'm trying to collect Max values using the AD7997 connected to an I2C bus operating at 156us/bit.
During startup initialize the ADC as follows:
Vin1-Vin4 are connected so set the Configuration register…
Hi Sean,
I measured the frequency using my Amprobe 37XR-A though I am questioning what I measured there as I'm not sure if measuring frequency is something only possible on AC circuits, it is possible that I had it mis-configured and thought I was reading…