• Simulation using AD8336, AD736 and AD8551 spice models in Pspice

    Original Question: Simulation using AD8336, AD736 and AD8551 spice models in Pspice by sakshi_rawal

     

     

    I have this circuit to be simulated in Pspice. I'm a complete newbie to it. But so far have managed to make the schematic (adding external components…

  • RE: ad736 Input range

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …

  • RE: Query Regarding AD736...

    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    …

  • ad736 output

    Hi

    I have c connected my circuit as in b battery operated option in ad736..my input is phase voltage which is coming out of 3 phase inverter..input properties are 20khz pulse train with varying widths with 72vdc amplitude... i decimated it to 300mv (yellow…

  • AD736 behaviour in multisim

    Hi Folks,

    I am trying to simulate AD736 behaviour in multisim. I have used the reference design in the data sheet on page 15 diagram 25 -  AD736 with a High Impedance Input Attenuator.

    But when i put a 1V PK signal at 50Hz it gives an output of 77.7mV…

  • AD736 Application Design

    Hi I am bit new with RMS to DC converter. I try to use AD737 but found out put of it is  -VE. So, decide to use

    AD736. My application is reading  AC signal from 3 Phase voltage ( between 0.5V to 2V at 50Hz/60HZ). Need fast satelliting time( under 10mS…

  • Single Supply operation for AD736

    Hi

    I found the application note AN-268 regarding the RMS to DC converters. IN that i found a circuit that allows for single supply operation of the AD736 (Figure 12 in the application note). However when i try to simulate the circuit, it does not work…

  • RE: AD736 input amplitude for 32kHZ

    Hello James

    I h have connected the circuit a in battery powered option of ad736 datasheeet.. But output is not as desired. Please help me...i want to attach photos for your better understanding.. Where can I do that..

  • AD736 output reference is not ground

    Hello,

    I am using AD736 to measure rms value of dc currents. The circuit is simulated in PSpice. The problem is that the output voltage is always fixed on 1.08V in the input range of 10mV~4V. However if I measure the voltage on C3, the voltage is the…

  • AD736上电瞬间，输入接地，输出有几个mV

    如上图所示，在上电瞬间，AD736的2脚接地的情况下，6脚有1-3mV左右的电压，然后此电压慢慢减小，3分钟之后达到稳定值。

    背景：上一版电源用的是2575+7660，情况就好很多，但由于空间限制，把电源改为MP2451 + 7660，麻烦就来了，每次重新上电都会出现这种情况，如题。 从电源的的纹波看不出有什么区别，上电瞬间的驱动波形也基本上是一样的。

    上传几个测试的波形：

    b7fb51b22ca24f94ff3df925a36d54eb.html

    目前用的上电瞬间有输出的上电波…