Good day everyone,
I just want to make sure I understand the operation of this device(AD7352).
From the description it appears that the device has 2 input channels and can sample each channel at up to 3MPSP at a 12 bit resolution. The output of…
From the description it appears that the device has 2 input channels and can sample each channel at up to 3MPSP at a 12 bit resolution. The output of the…
Yes, you are correct. The AD7357 has got one cycle of latency while that delay is not present on the AD7352/56 parts. When clocking out data from the AD7356 and AD7352, the result you are clocking out is from the current conversion.
I want to feed the AD7352 ADC differentially with the differential baseband amplifier outputs of the AD8348 Quad Demod.
Do I need a matching network or is a series termination sufficient?
I am unable to find data on the input impedance of the AD7352…
I am trying to test AD7352 using AD7352 evaluation board provided by ADI, I am using the internal reference of 2.048 V.
I am facing issue when i am feeding a sine wave of 10KHz and 4.4Vpp. I am feeding the signal using a signal generator and…
1. AD7356 /cs信号没有最大时间间隔要求. 正常模式下，可以即时转换。
2. AD7352 跟AD7356时序类似。
in the datasheets of the AD7357 AD7356 and AD7357 there is no information about an offset or gain error drift (over temperature). But the Positive Full-Scale Error and the Negative Full-Scale Error is defined.
Is any temperature drift…
I have attached a list of some of the ADCs that fit your criteria of 2MSPS sampling rate or higher at resolution of 12bits or more.
You may also wanted to check the ADI website and do a parametric search (http://www.analog.com/ps/psthandler…