Good morning.
We are using AD7264 in our design.
AD7264 is interfaced with iMX6 NXP Processor.
We would be grateful to have any insight on the queries detailed.
Scenario:
Validating SPI Communication with AD7264
Queries
Dear All,
Could you please give us some hints on what might be happening with AD7264 that we have. The device is configured in control register mode (not pin driven). the Vdrive is 3V.
Basically we have AD7246 on a custom board and the SPI control/data…
Hi ALL
I want connect ad7264 (in software mode via spi) to aduc7128. But I found problems
1. SPI module in aduc7128 work transmite only 8/16/24/32 bits . But ad7264 required 33 /47 bits.
2. If i write software spi, it made slow...
Plz help
Hi ALL
The ad7264 in control register mode.
1Q. How to work ad7264 if i write to control register G0=0 ,G1=0, G2=0 ,G3=0 ? see page in datasheet 21
2Q How to work ad7264 if i write to control register PD0=1, PD=1, PD2=1 ? see page in datasheet 21
…AD7264 fit into my design with the built-in PGA.
However, I couldn't set different gain for each PGA. I need to set different gain for each input.
AD7264 only allow one setting, and that will apply to both PGA.
Is there any equivalent ADC with…
Hello,
For our application, we are using AD7264 as input stage.
The AD7264 will be fed with four analogue differential channels:
Datasheet defines two specific values for Vcm r…
Hello,
For our application, we are using AD7264 as input stage.
The AD7264 will be fed with four analogue differential channels:
Datasheet defines two specific values for Vcm…
