Hello,

In the user guide are two PSSR graphs. Why do they have a different line for 10% LSB?

The LSB is defined by the range. So with the 16 V range one LSB would be 2.44 µV = 62.25 dBmV.

That is in line to the upper graph.

Why does the lower graph…

I want to out 0 to 7V

so I plan to set the output voltage range to -10V　to　10V　

Q1　Do I need -12V for AVSS and 12V for AVDD?
　　Can AVSS be -9V and AVDD be 9V?

Q2　If ± 9V is OK, will the phase be inverted if I accidentally input the DAC code to output 9V…

Hello,

We are developing a board based on AD5766/AD5767. I need linux driver for this chip. But i could only find out Non-os driver from the following link.

https://wiki.analog.com/resources/tools-software/uc-drivers/ad5766

I could not find Linux driver…

在ADI公司购买了EVAL-AD5767SD2Z评估板，我想咨询一下，ADI公司官网上有给参考代码，给了.c和.h文件，这个程序是下载到这个评估板里吗，还是下载到连接这个评估板的单片机里？

在贵公司购买了评估版EVAL-AD5767。在AD5767主页找到了驱动代码参考，如图1所示。放到Keil中编译发现缺少几个头文件，如图2所示。想咨询一下，这个参考代码是在XILINX下运行的吗？

如果我购买与之配套的SDP-B控制板，这个参考代码能否在VisualDSP5.1++下正常运行？

The following is a brief description of the AD5767 Spice Macromodel.

The Spice netlist can be downloaded from the AD5767 product page:

http://www.analog.com/en/products/digital-to-analog-converters/precision-dac/bipolar-da-converters/ad5767.html#product…

Hi all,

Our users will use the AD5767.
They use the Dither function.

Please let me know the input impedance value of the dither signal pin (N0,N1).

If you have a question, please let me know.

Best regards,

Hiro

I can use the ACE software (Analysis | Control | Evaluation (ACE) Software | Design Center | Analog Devices ) to control and configure the EVAL-AD5767 DAC (AD5767 Datasheet and Product Info | Analog Devices) using the SDP-CB1Z (http://www.analog.com/en…