• AD5640: Increasing gain

    If I want an output from 0V to 3.3V (in a system with a 3.3V supply) can I put
    a resistor between the output pin and the FB pin to increase the gain from 2 to


    This is not the best approach.  The device is internally trimmed to comply…
  • EVAL-AD5662/AD5660/AD5640/AD5620

    Hi everyone!

    I'm using EVAL-AD5662/AD5660/AD5640/AD5620 and have AD5660 as my DAC and I noticed that there are grounding problems to the AGND and DGND pins of the evaluation board. It is said in the datasheet of the evaluation board that the analog GND…

  • AD5620 or AD5640- Using Vfb to control the DAC output



    Using the AD5620 or AD5640 with Vref=1.25v.

    1- According to the datasheet Vref pin must be shorted with Vout and it gives a maximum output voltage of 2xVref with resolution of 2xVref/2^N.

    Question: Is there a possibility of connecting Vfb…

  • 使用寿命


  • RE: looking for reference circuit of AD9834 to op amp

    Hi Miguel,

    The specifics of some of the parameters are still to be determined but the supply voltage and output range would be about 20V, max current output could be about 100ma, Not sure about the impedance.  It would need high amplitude resolution so…

  • [征文] IN118的基准源用AD的芯片,上面写着D6B,困饶我很久了 AD5312


  • ADI芯片辨识、型号查找


  • AD5620 Model Options

    i have a question about AD5620 Model Options.

    what difference between AD5620A..., AD5620B... and AD5620C...? Difference is only in relative accuracy between models (A the best?)

    next, AD5620-2-3 parts include an internal, 2.5 V, 5 ppm/°C reference,…

  • EVAL-AD5660: Source code of the included GUI and firmware

    Hi all,

    I am currently evaluating EVAL-AD5660 and i am getting erroneous output in the GUI reading of the voltage. At full scale, I am getting a 2.75V reading but the device should only have a 2.5V full scale reading. (Vref = 1.249V).

    I have checked…

  • ADI公司解决方案通报—数模转换器IC


    • 提供动态功率控制的DAC
    • 低功耗DAC可节省功率
    • 突破性1 ppm DAC
    • 基站发射架构中的IF DAC解决方案
    • 新款DDS IC功耗更低、尺寸更小
    • 多路输出低抖动时钟发生器
    • 数据转换知识资源
    • 低功耗精密运算放大器用作DAC缓冲器
    • 选型指南
    • RF DAC实现单封装比特流到射频转换解决方案
    • 用于无线通信设备的混合信号前端IC
    • 采用WLCSP封装的8通道denseDAC .
    • 采用紧凑型封装的多功能、易用、精密DAC
    • 新型系…