• EVAL-AD5372 as standalone DAC

    I am attempting to use the eval-AD5372 as a standalone DAC. Whats a good way to interface it with a linux PC.

    I am am hoping to just set the voltage for each channel using say a c program, ideally with the USB interface. If that is not possible, would…

  • Controlling AD5372 with Arduino Nano

    I am trying to control my AD5372, 16-bit 32 Channel, Digital to Analog Converter with an Arduino nano. I have been looking up code and I understand that I will need to work around the fact that SPI transfer for the arduino occurs 8 bits at a time (24…

  • Controlling AD5372 Using 64-bit MATLAB

    Hi,

    I am trying to control the DAC EVAL-AD5372 from the MATLAB software environment.

    I was able to do this successfully from 32bit MATLAB using the loadlibrary function and DLL ADI_CYUSB_USB4.dll found from http://ez.analog.com/thread/11105 and a wrapper…

  • Problem: AD5372 Output always 0V

    Hi,

     

    I’m using an evaluation board for the AD5372 DAC-chip, with which I have the

    following problem:

     

    I measured the outputted voltages using an oscilloscope, but no matter which

    command I send to the EVAL-board the output is always 0 V. The…

  • How to increase AD5372 analog output speed?

    I am controlling the AD5372 with an mBed using SPI.  To spare a lengthy discussion, I am attaching the LabVIEW VI used to control the DAC - created using LabVIEW 2010.  Currently, we can output data (0 - 8 V) to 32 channels in about 8 seconds but this is…

  • RE: Modulating the analog output in AD5372

    Are you asking about modulating the reference or writing to the DACs to modulate the output.

    If you want to apply a signal to the reference to modulate the output then the reference bandwidth is a concern. The AD5372 is not intended to function as a…

  • What is the delay time of AD5372 and AD5382?

    Dear Sir/Madam,

    Please advice me what is the delay time from INPUT to OUTPUT for AD5372 and AD5382?

    I just confirmed your datasheet but I cannot find it well.

    Maybe the delay time is not guaranteed I think.

    It is that I understand.

    But for my reference…

  • Controlling multiple AD5372 Boards via *.dll file? (Thread Solved?)

    Hello, I am trying to use 3 AD5372 boards to control a larger PCB board. I have used the dll commands to control a single board through Matlab, but I am trying to control 3 boards through Matlab. I have tried opening the second board, and it throws an…

  • AD5370, AD5371, AD5372 and AD5373 evaluation board software commands

    Hi,

    This discussion explains how to use the new dll library available for both Windows 32 and 64 bits OS.

    We aim to provide a detailed explanation of the dll functions and the commands associate with each evaluation board.

    This discussion WONT provide…

  • RE: SPI interface to connect to AD5372 in linux via IIO

    Hi,

    As far as I know there are no Linux drivers for USB-SPI bridges. But you could of course try to write one.

    Usually we run Linux on a embedded base board, like the Blackfin EZ-KIT boards, which have a native SPI host controller and connect the evaluation…