I have a quetion about NOP in direct read sequence.
About D/S discription (below), Reading user data directly from EEMEM dose not require a similar NOP command execution.
but user data is only EEMEM4-EEMEM15
Are EEMEM0-EEMEM3 required NOP command…
I'm amplifying the output of a 100mohm 4 terminal (kelvin) shunt with the AD8253. I'm using a lab quality calibrator as the signal (current) source. Problem I'm having is when injecting a DC current through the shunt; I have a lot of 50Hz…
Is there more noise data for 1KΩ DigiPots than the 1KHz spot noise spec in the data sheets? For example, the AD5253 (1K) shows 3 nV/√Hz at 1KHz which makes sense for a pure resistance in the neighborhood of 1KΩ. I am interested in the region of 0.1Hz…
I'd like to ask you about Write sequence and Write Protection function in AD5235BRUZ25.If I use Write Protection function, do you have any rules in write sequence with Write Protection?For example, I should enable WP faster than other…
I'd like to determine a suitable series resistor value put on I2C lines of AD5254.
Therefore, could you tell me typical drive strength (output current) of I2C interface of AD5254 and its IBIS model?