2011-04-13 17:57:35 kernel BUG at kernel/timer.c:951
Daniel Tripp (UNITED STATES)
I'm currently (rarely occurring) seeing an kernel crash on the 524 with the following dump. Attached is my kernel config. I'm running the 2010RC5 kernel…
I got led blinking eventually but it seems that GPIO output need "1" in 28_0 format not 5_23 as an-951 says.
Could someone tell what "silent" conversions sigma studio do? Example: to convert from 5.23 format to 28.0 i need to multiply number…
The calculation of index values is described in application note AN-951, which is available here:
On page 11 you can find the formula for converting 28.0 index values to 5.23 values…
Well, I still don't understand the root of the problem.
The couple TCount/Multiplexer work only when it's connected to Sigmastudio.
But once flashed and "selfbooted", All work except the input toggle.
At a reset of the board…
Hi Hope ,
No worries. I'll try to help you the best way I can. On your questions:
1. I am giving you this link to the ADN8835 user guide evaluation board. You can check on page 9 how the PCB layout was routed.
we faced two problems about the AD9371 loading profile
we have used AD9371 Filter Wizard v1.10 to generate a customized profile like below pic (attached the profile.txt)
There are a few options.
Having used the ADAU1701 on the SURE Electronics JAB3-50 board, I would like to implement a rotary encoder to my designs. However I don't seems to get it to work.
I have read the AN-951 on the subject, but there must be something I'm doing wrong…