This is my working profile:
I want to update the current Rx filter taps from 48 to 72. Is…
I did not load any special filters, I am running defaults. My intention was to get this up and running with the default and then focus on details such as the filters. For my use case the rx and tx bandwidths should match.
Here is a screen shot of my setting…
你好，官网文件 直接跳转an-905 无法下载软件
an interop report for this board is available here : AN 905: JESD204B Intel® FPGA IP and ADI AD9213 Interoperability Report for Intel Stratix® 10 Devices (d2pgu9s4sfmw1s.cloudfront.net)
Below is my profile
and image from std. out of iio-osc from host machine.
I added .ini suffix to the profile and still no luck. Before doing so iio-osc said it couldn't find the file.
<profile Talise version=1 name=Tx_BW200_IR245p76_Rx_BW50_OR61p44_ORx_BW200_OR245p76…
The dev_clock frequency is 80MHz.
Sorry, it looks like the profiles attachment was cutoff. Yes, we are generating the profile from the Filter Wizard tool.
We are have generated the config files from the TES GUI and use them as a guide when populating…
The VisualAnalog cannot provide you information on how to obtain time at each slot as per input signal. You can refer to the application attached AN-905 VisualAnalog Converter Evaluation Tool Version 1.0 User Manual Application Note (Rev. 0).
[#4434] trunk head strace build fails at syscall.c
Submitted By: Mingquan Pan
2008-09-21 22:04:00 Close Date
Closed Fixed In Release:
Found In Release:
We like to use your new if-wideband-rx-subsystem AD6676 for our newtuner generation and I have two question regarding this device:
Our system data rate is 101.875MHz and we like to use the internalsynthesizer and the output decimation filter. If we…
the filter file is below. you can load the profile by ADI IIO Oscilloscope software.
the spurs offset is 15MHZ .
I have already used tracking function, but no effect.
the good case is:
the bad case is :