Looking specifically for a generated TES profile for the following criteria
RX1 (just receiving on RX1A)
Carrier Frequency: 2.439 MHz (Channel 37)
Bandwidth: 2 MHz
Sample Rate: 8 MSPS
Interested in all the settings needed to create the profile with this critieria within TES.
Hi,
It is possible to have a sampling rate and the bandwidth to be 8MSPS and 2MHz respectively since the ADRV9002 has a tx/rx bandwidth range of 12kHz - 40MHz. This configuration can be implemented as shown below
It is not possible to have a carrier frequency of 2.439MHz since the frequency range is from 30MHz to 6GHz. One need to have an upconverter in front of ADRV9002 to make sure that the signal frequency is within acceptable range.
Regards
Rahul
Hi DRK,
No problem at all :). Typically, we encourage users to configure independently, and we’re happy to provide guidance to support the process. There are few examples and guidance in our user guide to start with. However, in this instance, we’ve prepared an example file to assist you. 
Regards
Rahul
