Getting started with AD-FMCOMMS3-EBZ with Xilinx Zynq 7000 ZC702 Evaluation Board on Windows

You can either use Linux or no-Os drivers for configuring the AD9361 with ZC702?

If you are using Linux drivers you can create an SD card using the image file available in the below wiki link and then use the IIO GUI which can run on windows platform for configuring or testing the chip. 

Analog Devices Kuiper Linux [Analog Devices Wiki] 

IIO Oscilloscope [Analog Devices Wiki] 

If you are using No-Os drivers ,then follow the below steps for the chip bringup on ZC702:

Building HDL [Analog Devices Wiki] 

AD-FMCOMMS3-EBZ User Guide [Analog Devices Wiki] 

In both cases, you need to connect FMCOMMS3 with ZC702 through FMC connector. Not sure if I understood your question completely. Hope above helps.

Please tell me how can I Build HDL in Windows. Actually I am using Vivado on Windows to program my Xilinx Zynq 7000 SoC ZC702 Evaluation Board. So I want to be able to use the AD-FMCOMMS3-EBZ with Xilinx Zynq 7000 ZC702 Evaluation Board on Windows itself. I understand that I need to build HDL for that but to use the 'make' command etc I require would require a Windows Subsystem for Linux (WSL) but when I am trying to use 'make' then it expects the Vivado files to be in Linux format. I don't understand how can I BUILD HDL in Windows. Please Help. Thank you.

Please tell me how can I Build HDL in Windows. Actually I am using Vivado on Windows to program my Xilinx Zynq 7000 SoC ZC702 Evaluation Board. So I want to be able to use the AD-FMCOMMS3-EBZ with Xilinx Zynq 7000 ZC702 Evaluation Board on Windows itself. I understand that I need to build HDL for that but to use the 'make' command etc I require would require a Windows Subsystem for Linux (WSL) but when I am trying to use 'make' then it expects the Vivado files to be in Linux format. I don't understand how can I BUILD HDL in Windows. Please Help. Thank you.