ad9364 transceiver register gui

Hi, Can you please specify exactly what you are looking for? For AD936X there is GUI where you can control the device and also register settings available for custom changes and can read or write a particular register.

There are no-OS drivers available and it helps users to configure and operate the device.

Thanks; where do you get this GUI?  I see the no-OS drivers, but they don't provide observability to the register values that should be loaded.

Please refer to the below link for GUI

https://wiki.analog.com/resources/tools-software/linux-software/fmcomms2_plugin

Please go through to the below link for the Hardware setup to access GUI.

https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms2-ebz

It doesn't show where to download this plug in.  Can I run the plug in in linux, without the zcu102 system.  I will be building our own dsp system platform.

It doesn't work on custom HW, please refer to the link shared previous reply to know the supported hardware. 

You need Xilinx hardware and an AD936X eval board to access the GUI.

But I am designing custom hardware connecting to the FMC of the dev board.  Why would I have this restriction?  Do I need to get an NDA with Analog Devices to get a GUI that is not tied to the your xilinx build?

For custom boards design, you use no-OS drivers to configure the drivers.

So, the GUI AD936X Plugin can run on the non-OS platform?  Where do you get the AD936X Plugin? I didn't see a download tab or Git location on the web page.

So, the GUI AD936X Plugin can run on the non-OS platform?  Where do you get the AD936X Plugin? I didn't see a download tab or Git location on the web page.

Refer to below Git location for GUI download.

https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz/software/linux/applications/iio_scope

Please note that you need supported hardware to configure the AD936X device.