Products Mentioned

ADRV9029 Recommended for New Designs
The ADRV9029 is a highly integrated, radio frequency (RF) agile transceiver offering four independently controlled transmitters, dedicated observation...
Datasheet
ADRV9029 on Analog.com

Associated Drivers

  • State Not Answered
  • Replies 26 replies
  • Subscribers 10 subscribers
  • Views 1724 views
  • Users 0 members are here
Options
Related 

        

            Post
             Go back to editing
        

    

    


    

    









		












	
	
			
	
			
		
	
	
		

		
ADRV9029 Inquiry about DPD abnormal symptoms.ㅁㅇ



		

			

									
					    Big
					
							

			
				
									
											
			
			
				
    
			
			
			    	
			                    
                
				                on Apr 3, 2024 
				
			
			
		
    

				
		
    
		    		    
		    
		    		      		            		        
    Category: Hardware
    
    		        		            		    
    Product Number:  ADRV9029  
    
    		        		    		    	
			
    Hello,
    

    I would like to inquire because there is a phenomenon in which the DPD does not operate during DPD measurement.
    

    Changed the Tx Analog Atten value of ADRV9029 from -5dB to -35dB. At this time, DPD Mean ORX Power changed from -15 to -45, and DPD Peak ORX Power changed from -5 to -10.
    

    Logically, I think DPD Peak ORX Power should change to around -35. DPD doesn't seem to work well due to this issue.
    

    Why isn't my DPD Peak ORX Power changing?
    

    In my opinion, the signal from LO inside the ADRV9029 passes through the ADC and is input to the DPD Path.
    

    If not, for some reason the DPD Peak ORX Power value does not change even if I adjust the Tx Analog Atten value of ADRV9029?
    

    For reference, on boards where DPD operates normally, the DPD Peak ORX Power has changed to -35.
    

    Thanks in advance.
    
									
			                
    Thread Notes   
    
        
    
        
            
		
    

				
						
        

    
    Tags: 
                                            
                 hardware
                
                                                    
                 ADRV9029
                
                                                    
                 Wideband Transceiver IC
                
                                                    
                 rf and microwave
                
                                                    
                 RF Integrated Transceivers
                
                                
            
    
    
    

		
    
			
						
									
									
						
						
			
			
			
			
		
    

        
        

					
    
			
    


    
















    
	
    
	
    
					



			








	
	
	
	



Parents
	



Reply

      


    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
      •  Analog Employees  
      
            
						
                            
            
            				
            
                on Apr 4, 2024 11:38 PM
            
            
												
						in reply to Big
					
									
      
	
      

		
		
      
					
      Big said:
      dpdPeakSearchWindowSize=8192
      

      Why is the Peak Serach window size is so small?, can you set it to 491520 samples? I don't think this can be so lower value.
      

      Big said:
      dpdIndirectRegularizationValue=20
      

      Set this to 25 and check if it helps?
      

      Another debug option:
      

      Can you enable direct learning and check if it helps?
      

      Can you please share the complete DPD statistics as well including the DPD metrics such as Direct, Indirect EVM, select and Indirect errors along with the DPD error code details?
      
			
      

		
			
	      

		
		
	
      
	
      
		
      
			
		
      
	
      
	
      
		
						
						
				
						
				
				
		
		
      
			
		
      
	
      

      

      • 


    


Children
	
      
	

    • 
	
      



	
		
	
	



      
	
      
		
      
							
					
      
		
      
			
													0
							
			
				
									
							        
			
			
			
        
            
						
                            
            
            				
            
                on Apr 7, 2024 9:57 PM
            
            
												
						in reply to Ramarao
					
									
        
	
        

		
		
        
					
        As a result of testing after changing dpdPeakSearchWindowSize, it was confirmed that DPD operates normally.
        

        Thank you for your cooperation in many ways.
        
			
        

		
			
	      

		
		
	
        
	
        
		
        
			
		
        
	
        
	
        
		
						
						
				
						
				
				
		
		
        
			
		
        
	
        

        

        • 

	

      • 
	
        



	
		
	
	



        
	
        
		
        
							
					
        
		
        
			
													0
							
			
				
									
							        
			
			
			
          
            
						
                            
            
            				
            
                on Apr 8, 2024 4:00 AM
            
            
												
						in reply to Big
					
									
          
	
          

		
		
          
					
          Even if I change dpdPeakSearchWindowSize, DPD still doesn't seem to work properly.
          There seems to be some improvement, but compared to other ports, error code 0x341d occurs in the Tx2 port and DPD does not seem to be operating properly.
          

          Please take a look below and give me some advice.
          

           
          

           
          
			
          

		
			
	      

		
		
	
          
	
          
		
          
			
		
          
	
          
	
          
		
						
						
				
						
				
				
		
		
          
			
		
          
	
          

          

          • 

	

        • 
	
          



	
		
	
	



          
	
          
		
          
							
					
          
		
          
			
													0
							
			
				
									
							        
			
			
			
          •  Analog Employees  
          
            
						
                            
            
            				
            
                on Apr 8, 2024 4:13 AM
            
            
												
						in reply to Big
					
									
          
	
          

		
		
          
					
          Set the below parameter to 25 and check.
          
			
          

		
			
	      

		
		
	
          
	
          
		
          
			
		
          
	
          
	
          
		
						
						
				
						
				
				
		
		
          
			
		
          
	
          

          

          • 

	

        • 
	
          



	
		
	
	



          
	
          
		
          
							
					
          
		
          
			
													0
							
			
				
									
							        
			
			
			
            
            
						
                            
            
            				
            
                on Apr 8, 2024 4:20 AM
            
            
												
						in reply to Ramarao
					
									
            
	
            

		
		
            
					
            Even if you set dpdIndirectRegularizationValue=25, the result is the same.
            

            Is there anything else I need to check?
            
			
            

		
			
	      

		
		
	
            
	
            
		
            
			
		
            
	
            
	
            
		
						
						
				
						
				
				
		
		
            
			
		
            
	
            

            

            • 

	

          • 
	
            



	
		
	
	



            
	
            
		
            
							
					
            
		
            
			
													0
							
			
				
									
							        
			
			
			
            •  Analog Employees  
            
            
						
                            
            
            				
            
                on Apr 8, 2024 4:27 AM
            
            
												
						in reply to Big
					
									
            
	
            

		
		
            
					
            Are you seeing this issue only on TX2 channel?
            

            You can try relaxing the DPD robustness threshold settings. Set Threshold0 to 5 and Threshold1 to 10 and check if it improves.
            

            Attached the example script that you can use for implementing C code in your customer board.
            

            

             
            

            



            
    
            
        Fullscreen
        DpdRobustness_Madura (1).txt
        Download
    
            
    
            #################################################################################
#GUI Version: 0.0.0.939
#DLL Version: 0.0.0.857
#Cmd Server Version: 0.0.0.857
#FPGA Version: 0xD9000007
#ARM Version: 0.0.0.503
#StreamVersion: 0.0.0.73
#Author: Anand Kumar
#Precondition: Ensure that the DPD tracking cal is disabled before running this script
#Description: This script sets up the DPD robustness framework, and reads back the metrics and action mask after setting up the DPD 
# Specifically, the DPD LUT updates are skipped if indirect error is greater than 5%
# If the direct EVM is persistently greater than 5% for at least 10 update periods, the DPD is reset.
#################################################################################

#Import Reference to the DLL
import System
import clr
import time
from System import Array
clr.AddReferenceToFileAndPath("C:\\Program Files\\Analog Devices\\ADRV9025 Transceiver Evaluation Software_x64_FULL\\adrvtrx_dll.dll")
from adrv9010_dll import AdiEvaluationSystem
from adrv9010_dll import Types
from adrv9010_dll import Ad9528Types

def spiRead(address):
    data = adrv9010.Hal.SpiByteRead(address, 0)
    print "SPI Read Address " + hex(address) + ": " + hex(data[1])

def spiWrite(address, data):
    adrv9010.Hal.SpiByteWrite(address, data)
    print "SPI Write Address " + hex(address) + ": " + hex(data)

def dpdStabilityCondnSetup(txChannelMask = 0xF):
    DEFAULT_WARNING_PERCENTAGE = 3
    DEFAULT_ERROR_PERCENTAGE = 8
    DEFAULT_WARNING_dBFS = -36
    DEFAULT_ERROR_dBFS = -40  
    ERROR_PERSISTENT_COUNT = 10
	
    dpdFaultConditionArr = Array.CreateInstance(Types.adi_adrv9010_DpdFaultCondition_t, 10)
    dpdFaultConditionArr[0] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[0].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_INDIRECT_EVM
    dpdFaultConditionArr[0].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_GREATER_THAN
    dpdFaultConditionArr[0].threshold0 = (DEFAULT_WARNING_PERCENTAGE)
    dpdFaultConditionArr[0].threshold1 = (DEFAULT_ERROR_PERCENTAGE)
    dpdFaultConditionArr[0].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[1] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[1].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_DIRECT_EVM
    dpdFaultConditionArr[1].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_GREATER_THAN
    dpdFaultConditionArr[1].threshold0 = (DEFAULT_WARNING_PERCENTAGE)
    dpdFaultConditionArr[1].threshold1 = (DEFAULT_ERROR_PERCENTAGE)
    dpdFaultConditionArr[1].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[2] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[2].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_SELECT_ERROR
    dpdFaultConditionArr[2].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_GREATER_THAN
    dpdFaultConditionArr[2].threshold0 = (DEFAULT_WARNING_PERCENTAGE)
    dpdFaultConditionArr[2].threshold1 = (DEFAULT_ERROR_PERCENTAGE)
    dpdFaultConditionArr[2].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[3] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[3].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_INDIRECT_ERROR
    dpdFaultConditionArr[3].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_GREATER_THAN
    dpdFaultConditionArr[3].threshold0 = (DEFAULT_WARNING_PERCENTAGE)
    dpdFaultConditionArr[3].threshold1 = (DEFAULT_ERROR_PERCENTAGE)
    dpdFaultConditionArr[3].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[4] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[4].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_MEAN_TU_POWER
    dpdFaultConditionArr[4].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_LESS_THAN
    dpdFaultConditionArr[4].threshold0 = (-25 * 100)
    dpdFaultConditionArr[4].threshold1 = (-40 * 100)
    dpdFaultConditionArr[4].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[5] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[5].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_PEAK_TU_POWER
    dpdFaultConditionArr[5].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_LESS_THAN
    dpdFaultConditionArr[5].threshold0 = (DEFAULT_WARNING_dBFS * 100)
    dpdFaultConditionArr[5].threshold1 = (DEFAULT_ERROR_dBFS * 100)
    dpdFaultConditionArr[5].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[6] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[6].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_PEAK_TX_POWER
    dpdFaultConditionArr[6].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_LESS_THAN
    dpdFaultConditionArr[6].threshold0 = (DEFAULT_WARNING_dBFS * 100)
    dpdFaultConditionArr[6].threshold1 = (DEFAULT_ERROR_dBFS * 100)
    dpdFaultConditionArr[6].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[7] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[7].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_MEAN_TX_POWER
    dpdFaultConditionArr[7].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_LESS_THAN
    dpdFaultConditionArr[7].threshold0 = (DEFAULT_WARNING_dBFS * 100)
    dpdFaultConditionArr[7].threshold1 = (DEFAULT_ERROR_dBFS * 100)
    dpdFaultConditionArr[7].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[8] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[8].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_PEAK_ORX_POWER
    dpdFaultConditionArr[8].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_LESS_THAN
    dpdFaultConditionArr[8].threshold0 = (DEFAULT_WARNING_dBFS * 100)
    dpdFaultConditionArr[8].threshold1 = (DEFAULT_ERROR_dBFS * 100)
    dpdFaultConditionArr[8].persistentCount = ERROR_PERSISTENT_COUNT

    dpdFaultConditionArr[9] = Types.adi_adrv9010_DpdFaultCondition_t()
    dpdFaultConditionArr[9].dpdMetric = Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_MEAN_ORX_POWER
    dpdFaultConditionArr[9].comparator = Types.adi_adrv9010_DpdComparator_e.ADI_ADRV9010_DPD_COMPARATOR_LESS_THAN
    dpdFaultConditionArr[9].threshold0 = (DEFAULT_WARNING_dBFS * 100)
    dpdFaultConditionArr[9].threshold1 = (DEFAULT_ERROR_dBFS * 100)
    dpdFaultConditionArr[9].persistentCount = ERROR_PERSISTENT_COUNT

    link.platform.board.Adrv9010Device.Dfe.DpdFaultConditionSet(txChannelMask, dpdFaultConditionArr, 10)

def dpdRecoveryActionConfigSet(txChannelMask = 0x0F):
    print"***************************************"
    print"Setting up Recovery Actions for DPD Robustness"   
    
    #Setup Recovery Action
    dpdRecoveryActionArr = Array.CreateInstance(Types.adi_adrv9010_DpdRecoveryActionConfig_t, 4)   

    #Configure Recovery Action for violation of threshold0
    dpdRecoveryActionArr[0] = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    dpdRecoveryActionArr[0].dpdErrorState = Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_0
    dpdRecoveryActionArr[0].dpdRecoveryAction.dpdMetricsMask = int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_DIRECT_EVM)
    dpdRecoveryActionArr[0].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_INDIRECT_ERROR)
    dpdRecoveryActionArr[0].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_SELECT_ERROR)
    dpdRecoveryActionArr[0].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_MEAN_TU_POWER)
    dpdRecoveryActionArr[0].dpdRecoveryAction.dpdActionMask = int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_SKIP_LUTS_UPDATE)

    #Configure Recovery Action for violation of threshold1
    dpdRecoveryActionArr[1] = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    dpdRecoveryActionArr[1].dpdErrorState = Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_1
    dpdRecoveryActionArr[1].dpdRecoveryAction.dpdMetricsMask = int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_DIRECT_EVM)
    dpdRecoveryActionArr[1].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_INDIRECT_ERROR)
    dpdRecoveryActionArr[1].dpdRecoveryAction.dpdActionMask = 0#int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_SKIP_LUTS_UPDATE)

    #Configure Recovery Action for persistent violation of threshold0
    thresh0ActionMaskPersistent = 0
    thresh0ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_SKIP_LUTS_UPDATE)
    thresh0ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_RESET_FIRST_DPD_FLAG)
    thresh0ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_REVERT_LUTS_TO_UNITY)
    thresh0ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_RESET_ADAPTATION_STATE)
	
    dpdRecoveryActionArr[2] = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    dpdRecoveryActionArr[2].dpdErrorState = Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_PERSISTENT_0
    dpdRecoveryActionArr[2].dpdRecoveryAction.dpdMetricsMask = int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_DIRECT_EVM)
    dpdRecoveryActionArr[2].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_INDIRECT_ERROR)
    dpdRecoveryActionArr[2].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_SELECT_ERROR)
    dpdRecoveryActionArr[2].dpdRecoveryAction.dpdActionMask = thresh0ActionMaskPersistent

    #Configure Recovery Action for persistent violation of threshold1
    thresh1ActionMaskPersistent = 0
    thresh1ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_SKIP_LUTS_UPDATE)
    thresh1ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_REVERT_LUTS_TO_UNITY)
    thresh1ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_RESET_ADAPTATION_STATE) 
    thresh1ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_RESET_FIRST_DPD_FLAG) 
    thresh1ActionMaskPersistent |= int(Types.adi_adrv9010_DpdRecoveryAction_e.ADI_ADRV9010_DPD_RECOVERY_ACTION_6DB_DIG_ATTEN)	

    dpdRecoveryActionArr[3] = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    dpdRecoveryActionArr[3].dpdErrorState = Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_PERSISTENT_1
    dpdRecoveryActionArr[3].dpdRecoveryAction.dpdMetricsMask = int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_DIRECT_EVM)
    dpdRecoveryActionArr[3].dpdRecoveryAction.dpdMetricsMask |= int(Types.adi_adrv9010_DpdMetric_e.ADI_ADRV9010_DPD_METRIC_INDIRECT_ERROR)
    dpdRecoveryActionArr[3].dpdRecoveryAction.dpdActionMask = 0#thresh1ActionMaskPersistent    

    #Program the recovery action in the device
    link.platform.board.Adrv9010Device.Dfe.DpdRecoveryActionSet(txChannelMask, dpdRecoveryActionArr, 4)
    print"***************************************"

def dpdRecoveryActionConfigGet():
    print"***************************************"
    print"Reading back Recovery Actions for DPD Robustness"  
    dpdRecoveryActionFromDevice = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    [recAction, dpdRecoveryActionFromDevice] = link.platform.board.Adrv9010Device.Dfe.DpdRecoveryActionGet(Types.adi_adrv9010_TxChannels_e.ADI_ADRV9010_TX1, Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_0, dpdRecoveryActionFromDevice)
    print "Recovery Action - Metrics Mask Error State 0 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdMetricsMask
    print "Recovery Action - Action Mask Error State 0 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdActionMask
    print " "

    dpdRecoveryActionFromDevice = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    [recAction, dpdRecoveryActionFromDevice] = link.platform.board.Adrv9010Device.Dfe.DpdRecoveryActionGet(Types.adi_adrv9010_TxChannels_e.ADI_ADRV9010_TX1, Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_1, dpdRecoveryActionFromDevice)
    print "Recovery Action - Metrics Mask Error State 1 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdMetricsMask
    print "Recovery Action - Action Mask Error State 1 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdActionMask
    print " "

    dpdRecoveryActionFromDevice = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    [recAction, dpdRecoveryActionFromDevice] = link.platform.board.Adrv9010Device.Dfe.DpdRecoveryActionGet(Types.adi_adrv9010_TxChannels_e.ADI_ADRV9010_TX1, Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_PERSISTENT_0, dpdRecoveryActionFromDevice)
    print "Recovery Action - Metrics Mask Persistent 0 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdMetricsMask
    print "Recovery Action - Action Mask Persistent 0 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdActionMask
    print " "

    dpdRecoveryActionFromDevice = Types.adi_adrv9010_DpdRecoveryActionConfig_t()
    [recAction, dpdRecoveryActionFromDevice] = link.platform.board.Adrv9010Device.Dfe.DpdRecoveryActionGet(Types.adi_adrv9010_TxChannels_e.ADI_ADRV9010_TX1, Types.adi_adrv9010_DpdErrorState_e.ADI_ADRV9010_DPD_ERR_STATE_PERSISTENT_1, dpdRecoveryActionFromDevice)
    print "Recovery Action - Metrics Mask Persistent 1 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdMetricsMask
    print "Recovery Action - Action Mask Persistent 1 =",dpdRecoveryActionFromDevice.dpdRecoveryAction.dpdActionMask
    print " "

#Create an Instance of the Class
link = AdiEvaluationSystem.Instance	
connect = False

if (link.IsConnected() == False):
    connect = True
    link.platform.board.Client.Connect("192.168.1.145", 55556) 
    print "Connecting"

if (link.IsConnected()):
    adrv9010 = link.Adrv9010Get(1)
    print "Connected"
    ##### YOUR CODE GOES HERE #####
    dpdStabilityCondnSetup()
    dpdRecoveryActionConfigSet()
    dpdRecoveryActionConfigGet()
    print "DPD Recovery Actions Configuration Complete"
else:
    print "Not Connected"

if (connect):
    link.platform.board.Client.Disconnect()
    print "Disconnected"
            

            


            
			
            

		
			
	      

		
		
	
            
	
            
		
            
			
		
            
	
            
	
            
		
						
						
				
						
				
				
		
		
            
			
		
            
	
            

            

            • 

	

          • 
	
            



	
		
	
	



            
	
            
		
            
							
					
            
		
            
			
													0
							
			
				
									
							        
			
			
			
              
            
						
                            
            
            				
            
                on Apr 8, 2024 8:03 PM
            
            
												
						in reply to Ramarao
					
									
              
	
              

		
		
              
					
              I tried modifying the threshold value, but DPD still does not work well.
              

              Are there any other debug points?
              
			
              

		
			
	      

		
		
	
              
	
              
		
              
			
		
              
	
              
	
              
		
						
						
				
						
				
				
		
		
              
			
		
              
	
              

              

              • 

	

            • 
	
              



	
		
	
	



              
	
              
		
              
							
					
              
		
              
			
													0
							
			
				
									
							        
			
			
			
                
            
						
                            
            
            				
            
                on Apr 8, 2024 10:10 PM
            
            
												
						in reply to Big
					
									
                
	
                

		
		
                
					
                There is one strange thing.
                

                Currently, our product's heat dissipation structure is designed to dissipate heat through a heat sink, and heat is dissipated into the heat sink through the thermal PAD attached to the top of the ADRV9025.
                

                The strange thing is that if you blow air on the heat sink with a fan, the DPD of TX2 operates normally as shown below.
                

                 
                
			
                

		
			
	      

		
		
	
                
	
                
		
                
			
		
                
	
                
	
                
		
						
						
				
						
				
				
		
		
                
			
		
                
	
                

                

                • 

	

              • 
	
                



	
		
	
	



                
	
                
		
                
							
					
                
		
                
			
													0
							
			
				
									
							        
			
			
			
                •  Analog Employees  
                
            
						
                            
            
            				
            
                on Apr 9, 2024 8:05 AM
            
            
												
						in reply to Big
					
									
                
	
                

		
		
                
					
                I don't think its related to the temperature. Has this issue been related to temperature, i guess the other Tx channels be also affected.
                

                Can you just enable DPD on Tx2 channel alone and see if you get into this error?
                

                What is the Tx to ORX mapping, is it 1 to 1, what is the TX to ORX timing?
                

                It can be a PA related issue as well. Can you check from this perspecitve?
                
			
                

		
			
	      

		
		
	
                
	
                
		
                
			
		
                
	
                
	
                
		
						
						
				
						
				
				
		
		
                
			
		
                
	
                

                

                • 

	

              • 
	
                



	
		
	
	



                
	
                
		
                
							
					
                
		
                
			
													0
							
			
				
									
							        
			
			
			
                  
            
						
                            
            
            				
            
                on Apr 10, 2024 10:35 PM
            
            
												
						in reply to Ramarao
					
									
                  
	
                  

		
		
                  
					
                  I don't think it's a heat problem, but the test results seem to indicate a heat problem, so I'm planning to replace the ADRV9025 and test it.
                  

                  And a strange phenomenon is that when testing the Tx2 channel alone, no error occurs.
                  Even when testing with 2Tx (Tx2 and Tx3 channels), no error occurs.
                  

                  I don't know for what reason.
                  

                  And Tx and ORx Mapping is 1:1 Mapping.
                  (Tx0 --> ORx0 ~~~~ Tx3 --> ORx3)
                   It may be a PA issue, but I don't expect it to be a PA issue.
                  

                  I don't know what causes this phenomenon to occur.
                  
			
                  

		
			
	      

		
		
	
                  
	
                  
		
                  
			
		
                  
	
                  
	
                  
		
						
						
				
						
				
				
		
		
                  
			
		
                  
	
                  

                  

                  • 

	

                • 
	
                  



	
		
	
	



                  
	
                  
		
                  
							
					
                  
		
                  
			
													0
							
			
				
									
							        
			
			
			
                  •  Analog Employees  
                  
            
						
                            
            
            				
            
                on Apr 10, 2024 10:59 PM
            
            
												
						in reply to Big
					
									
                  
	
                  

		
		
                  
					
                  Is this FDD or TDD?
                  

                  What is the TX to ORX switching timing?
                  

                  One reason could be Isolation issue.
                  
			
                  

		
			
	      

		
		
	
                  
	
                  
		
                  
			
		
                  
	
                  
	
                  
		
						
						
				
						
				
				
		
		
                  
			
		
                  
	
                  

                  

                  •