Question about the transceiver GUI DPD model

Irrespective of the no.of coefficients, the i,j,k values will be zeros before loading the model. And after loading the model and the DPD is enabled, the coefficients will get updated.

Please go through UG-1727 for more details, snippet below.

I am doing dpd sweep.

The dpdmodel_126_coefficients_1~92 coefficients all the same.

So I only test dpdmodel_126_coefficients_1, not test dpdmodel_126_coefficients_2~92.

Am I right?

You need to give the model sweep for all the models.

OK, thanks.