Jesd error occurred after modifying RX1 to ORX1

We can not assign ORX and RX data for the same framer in case of Non-Link sharing. This is allowed only in case of Link sharing.

We do not use RX1, but instead modify RX1 to ORX1 and use it only as ORX1.

That should be possible.

Do you have any suggestions for the jesd error caused by our modifications? This problem has been bothering us for a long time.

You mean you just want to assign ORX IQ data alone to Framer0 and don't use RX data at all? If so, thats possible.Im able to generate the profile and program it on my EVB setup.

Can you please share your requirements again here just to make sure im not missing anything?

No.of lanes, RX channels, TX channels, ORX channels, Need RX data on JESD? etc.

You should be able to use the latest GUI, configure and then try if its allowed or not.

www.analog.com/.../adrv9029.html

I have placed the c99 standard configuration files for our evaluation software in the following compressed package. Can you download and import the profile files to test on EVB?

1106c99profile.zip

I have imported your profile and could see the below on the framer configuration and is not allowed.

You can not have RX and ORX on a single framer in Non link sharing case. In Non Link sharing case, you can assign RX data to one framer and ORX data to another framer.

Thank you very much for your suggestion. We will make further modifications and retest. Also, which document is the screenshot of the document you sent earlier? Can you provide it? My document seems a bit outdated. I couldn't find this description in the UG-1727 document. I only searched for the following description in UG-1727:

It is there in UG-1727 that's available in the web.

https://www.analog.com/en/products/adrv9029.html#product-documentation