CFR pulse file related question in ADRV9029

Please refer Page 46 of the CFR/ DPD user guide.

You can have all the combinations of CFR pulses stored and the desired pulse can be loaded during run time as explained above. 

The CFR pulse is dependent on the carrier BW and its offset from the LO frequency.

If so, does it only consist of a predetermined carrier frequency and offset?

I know that CFR provided in IP form in Xilinx FPGA can do CFR with full band.

Is there a way to get to the CFR of ADI's current CFR with the full 200MHz band with all carrier and offset signals?

Help.

thank you.

The chip supports CFR for full band of 200MHz, however the pulse is dependent on the carrier BW and its offset. You need to have the required CFR pulses stored in some memory and load the CFR pulse for the respective carrier configuration as required.You can not have a single CFR pulse that can work for all carrier configurations and its offset.