Reduce the passband of RX path to minimum.(according with data sheet the RX BW is 10MHz)

Question

Hi, 
 in my design I use the ADRV9009.(Talise) I want to configure the Talise TX path and RX path to work with the signal BW passband (primary BW) for RX and TX =3MHz. My The sample clock for TX and RX is 122.88MSample/sec. 
 I works with TES SW. I generate profile with 1228MSample/sec. I receive the passband ~50MHz. I want to reduce the passband of RX path to minimum.(according with data sheet the RX BW is 10MHz). Is it possible? 
 If yes, please advise how? 
 Thanks 
 Haim

RR4 · Accepted Answer

Use the Talise configuration wizard to generate the profiles based on your requirements and use the generated profiles in TES GUI to program the chip. Below is the link to the download the configuration wizard. 
 https://www.analog.com/en/design-center/landing-pages/001/transceiver-evaluation-software.html)

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

Reduce the passband of RX path to minimum.(according with data sheet the RX BW is 10MHz)