Category: Hardware
Product Number: adrv9009
Hi,
in my design I use the ADRV9009.(Talise) I want to configure the Talise TX path and RX path to work with the signal BW passband (primary BW) for RX and TX =3MHz. My The sample clock for TX and RX is 122.88MSample/sec.
I works with TES SW. I generate profile with 1228MSample/sec. I receive the passband ~50MHz. I want to reduce the passband of RX path to minimum.(according with data sheet the RX BW is 10MHz). Is it possible?
If yes, please advise how?
Thanks
Haim
