how to change the IP address of Zync platform (EVAL-TPG-ZYNQ3).

Question

Hi, 
 my name is Haim Litvak 
 I works with EVB of ADRV9009 
 I want to know how to change the IP address of Zync platform (EVAL-TPG-ZYNQ3). 
 Please advise 
 Thanks 
 Haim

vanitha · Accepted Answer

For Linux based image, refer to the below link for step by step process on booting the board: 
 https://wiki.analog.com/resources/tools-software/linux-software/zynq_images#preparing_the_image 
 Once you are able to boot the board , you can connect it through the serial interface first try pinging the board , and then check the Default IP Address using ifconfig and then change the network interface configuration through the below command . 
 vi /etc/network/interfaces)

haim_l · Answer

Hi Vanitha, 
 I detected the "root cause" of the problem with RX Power Input. The problem was in RF cable. I replaced the RF cable. 
 After replaced the RF cable I received the expected Power Input levels. 
 For Pin=-9dBm and RX 1 Gain Index=255, I received the ~0dBFS, and in time scale: I , Q Levels=~+/-32000. For CW=1MHz and 10MHz. 
 
 Thanks 
 Haim

SLA Status	Assignee	Support Status
SLA Closed.		Closed

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

SLA Information

Products Mentioned

Associated Drivers

Thread Details

how to change the IP address of Zync platform (EVAL-TPG-ZYNQ3).

Thread Summary

Thread Notes

Before You Switch