ZC706 + ADRV9009 Linux image SD card - boot crash

TES only supports a ZYNQ3 evaluation board, not a ZC706.

-Travis

Travis,

The difference is only on the Zynq speed-grade ?

Thanks / Panou

Yes, and ZYNQ3 is built and supported by ADI only so you don't get vivado with it.

-Travis

Yes, and ZYNQ3 is built and supported by ADI only so you don't get vivado with it.

-Travis

Finally I found my mistake. I was not following the process to build a good SD-CARD.

Do you know how I can get access to the ADRV9009's FRU EEPROM contents ? I do not have access to an ADRV9009 board. Thanks

You have to use our fru dump tool: https://wiki.analog.com/resources/eval/user-guides/ad-fmcomms1-ebz/software/linux/applications/fru_dump

EEPROM files are located here: https://github.com/analogdevicesinc/fru_tools/tree/master/masterfiles

-Travis

Thanks I was able to program the FRU EEPROM on our ADRV9009 EEPROM.  But TES can still not connect to the ZC706. Do you know what should be displayed on the HDMI screen of the ZC706 running the ADRV9009 image ?. In other words how I can be sure that the ZC706 is running the ADRV9009 image ?

Unfornatatly I don't have access to the ADRV9009 eval board to double-check

As I mentioned previously, TES does not support ZC706. You must use a ZYNQ3.

-Travis

OK, but I don't find any ZYNQ3+ADRV9009 Boot image , only for  ZCU102+ADRV9009 in this link 

https://wiki.analog.com/resources/tools-software/linux-software/zynq_images#preparing_the_image

It is this one ? Once unzip there is a folder update_ZC706 not ZYNQ3 ... there is a lot of confusion for customers... This not clear at all and see some people not able to use their ZCU102 and ADI said only the ZC706 carrier is supported ...  

www.analog.com/.../ADRV9009-SDCARD.zip

This is documented in the product page: https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/EVAL-ADRV9008-9009.html#eb-overview under product details.

You can use the TES option with the ZYNQ3 only, which again is not a ZC706. This software is only designed for evaluation.

The prototyping platform, which is documented in the ADI wiki, officially supports only ZCU102 for ADRV9009 with the 2018_R1 release today. The same SD card image, as you linked to in the wiki, supports all the boards supported by the team that maintains that software.

The zip file you linked to the ADRV9009-SDCARD.zip only supports ADRV9009 with the ZYNQ3 platform.

-Travis

OK I understand better now. This something also very still strange for me . Inside the ADRV9009-SDCARD.zip there is a folder update_ZC706 which content uImage and device.dtb from 2016 ! How can be possible to have files that are from 2016 and others from 2018 ? 

So to work with ADRV9009 you need 1600USD(ADRV9009)+3300USD(ZYNQ3)+2500USD(ZCU102) = 7400USD to do the same that was possible to do with the ADRV9371 and ZC706 ... nice ... 

Panou