I am connecting an ADRV9002 to ZCU102 via the FMC connector. There appear to be mounting holes in the ADRV9002 at the correct locations, but they are extremely small and do not fit standard risers/screws that I have on hand.
Is the ADRV9002 PCB designed to be secured with risers/screws to the ZCU102?
Thanks in advance.
The first hole that is near P706 doesn't have any traces or power planes near it, so that one is not a big deal.
The second hole that is near P702 (the white 3-pin header) is more sensitive as it has a trace running near it on L7 and a power plane on L9.
So you can turn the oval shape into a circle, but I don't recommend going beyond that.
Thanks
Charly
The first hole that is near P706 doesn't have any traces or power planes near it, so that one is not a big deal.
The second hole that is near P702 (the white 3-pin header) is more sensitive as it has a trace running near it on L7 and a power plane on L9.
So you can turn the oval shape into a circle, but I don't recommend going beyond that.
Thanks
Charly
