What is the maximum range of connection between two LTP5901-IPM nodes, and are there any onboard sensors on the LTP5901 board?

Question

Accepted Answer

The maximum range between two LTP5901-IPM nodes is 100m (indoor) and 300m (outdoor). The actual range can be influenced by hardware integration, such as the choice of antenna. For more accurate range estimation, refer to the datasheet for transmit power and receiver sensitivity to compute the link budget for the specific deployment environment.
The LTP5901 board includes a calibrated temperature sensor on-chip that is accessible through the serial API. Additional sensors can be interfaced using I2C, SPI, or 1-wire master controller, but these interfaces are not accessible with the default firmware supplied in the eval kits. Access to these resources can only be achieved using the OCSDK development firmware.
For guidance and example projects on each available interface supported by the LTC5800 SoC, see this Confluence page: https://dustcloud.atlassian.net/wiki/spaces/ALLDOC/overview?mode=global

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Products Mentioned

LTP5901-IPM : FAQ