ADL5513 Low Frequency Operation

Question

The ADL5513 is specified to operate to 1 MHz, however the datasheet shows no performance information/expectations below 100MHz. 
 Can you provide some details please as to specs and graphs down at or near 1 MHz? 
 Thanks

ADIApproved · Accepted Answer

We typically characterize broad band devices such as the ADL5513, at the frequecies we know to have a lot of use, such as, common IF frequencies, common cellular frequencies etc. It would be an exhaustive task to characterize every frequency. As part of applications support, we will test a device at a certain frequency on an as-needed basis. Attached is data for 1 MHz. At 1 MHz the ADL5513 has 60 dB of dynamic range +/- 1 dB error, a slope of 21mV/dB and an intercept of -87.4 dBm.)

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Upcoming Learning & Events

Challenge Yourself!

What's Brewing

Places

Resources

Visit ContentZone

The Latest Read

New Release

Recent Technical Insights

Products Mentioned

Thread Details

ADL5513 Low Frequency Operation

Before You Switch