Error on Schematic/Eval Board on the ADL5367 Data Sheet

I don't have the eval board, so I cannot tell whether or not the error in the schematic of the eval board (page 20) is actually an error on the eval board. The schematic shows a voltage divider (R22 and R23) which is supposed to provide 3V logic from the 5V supply. You will notice that R22 has a hard-wired short across it, which defeats the purpose of the divider and will apply 5V to the supposedly 3V logic control pins.

Parents
  • 0
    •  Analog Employees 
    on Aug 2, 2018 4:15 PM
    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    EZ Admin
Reply
  • 0
    •  Analog Employees 
    on Aug 2, 2018 4:15 PM
    This question has been assumed as answered either offline via email or with a multi-part answer. This question has now been closed out. If you have an inquiry related to this topic please post a new question in the applicable product forum.

    Thank you,
    EZ Admin
Children
No Data