Does anyone have the software operating this evaluation board using a serial port in a PC?
(The software provided in AD site requires usb or SDP connection)
What layout revision is indicated on the board you have?
The new revision uses the SDP-S connector, which must be ordered separately.
The old board which has a nine pin serial port connector can be used with a USB adaptor. This should have been supplied with the kit. If not let me know.
Integer-N PLL software version 5 attached.
This is an older version software with parallel port support.
You will probably need administrator rights to access the parallel port.
The USB support won't work if you have installed any of the newer software.