Hello, I was pleased to use the configuration (calculations program)
found at this URL :
http://designtools.analog.com/dt/rfpll/adf411X.html
But ADF4118 is not supported
question : is there an upgrade of this wonderfull tool ?
thanks
Francois
Hello, I was pleased to use the configuration (calculations program)
found at this URL :
http://designtools.analog.com/dt/rfpll/adf411X.html
But ADF4118 is not supported
question : is there an upgrade of this wonderfull tool ?
thanks
Francois
My good, you see all my errors !
I don't know why the value 8 was selected !
I relaunch the ADI N software v.7.4.3
the prescaler was 8 ... I select ADF4110 and after ADF4118 and I see value 32
…Hello
It is not finish today.
I use my old Arduino test software (for ADF4110) to send the values in the latches
for the moment, Pll is not locked.
I have a question :
Latches are 21 bits long, I…
Hello, IT WORKS !
I am working on a complete unit already done, not me !
This PLL is working on 2356 Mhz using ADF4118 step 200 Khz
Using a sniffer I discover that they send "strange datas"…