Post Go back to editing

ADF4118 support

Hello, I was pleased to use the configuration (calculations program)

found at this URL :

http://designtools.analog.com/dt/rfpll/adf411X.html

But ADF4118 is not supported

question : is there an upgrade of this wonderfull tool ?

thanks

Francois

Parents
  • Hello, IT WORKS !

    I am working on a complete unit already done, not me !

    This PLL is working on 2356 Mhz using ADF4118 step 200 Khz

    Using a sniffer I discover that they send "strange datas"

    INIT = 00FA93

    R latch = 1000C8

    N latch = 101339

    N latch = 10B811

    yes two times the N latch with differents values

    and NO Function latch, and it works !

    I was able to decode the frequency of the PLL loop (200 Khz)

    My arduino program is quite finished , for frequency 2176 Mhz

    I send :

    INIT = 00FA93 (equal)

    R latch = 1000C8 (equal)

    N Latch = 10AA01 (new for 2176 Mhz)

    Function Latch = 00FA92 (as you explain me !)

    Lock detect is working well.

    So nothing special, but now I can close this call

    Many thanks for your great support.

    Francois

Reply
  • Hello, IT WORKS !

    I am working on a complete unit already done, not me !

    This PLL is working on 2356 Mhz using ADF4118 step 200 Khz

    Using a sniffer I discover that they send "strange datas"

    INIT = 00FA93

    R latch = 1000C8

    N latch = 101339

    N latch = 10B811

    yes two times the N latch with differents values

    and NO Function latch, and it works !

    I was able to decode the frequency of the PLL loop (200 Khz)

    My arduino program is quite finished , for frequency 2176 Mhz

    I send :

    INIT = 00FA93 (equal)

    R latch = 1000C8 (equal)

    N Latch = 10AA01 (new for 2176 Mhz)

    Function Latch = 00FA92 (as you explain me !)

    Lock detect is working well.

    So nothing special, but now I can close this call

    Many thanks for your great support.

    Francois

Children
No Data