Post Go back to editing

ADF4118 support

Hello, I was pleased to use the configuration (calculations program)

found at this URL :

http://designtools.analog.com/dt/rfpll/adf411X.html

But ADF4118 is not supported

question : is there an upgrade of this wonderfull tool ?

thanks

Francois

Parents
  • My good, you see all my errors !

    I don't know why the value 8 was selected !

    I relaunch the ADI N software v.7.4.3

    the prescaler was 8 ... I select ADF4110 and after ADF4118 and I see value 32

    As I remember, I started last time ... I select 4118 .. I enter 2176 Mhz ... 10 Mhz ..10 Khz  as RF setting, BUT I didn't check if prescaler was 32 !

    so I don't know what happens ..

    thank for your great help

    Francois

Reply
  • My good, you see all my errors !

    I don't know why the value 8 was selected !

    I relaunch the ADI N software v.7.4.3

    the prescaler was 8 ... I select ADF4110 and after ADF4118 and I see value 32

    As I remember, I started last time ... I select 4118 .. I enter 2176 Mhz ... 10 Mhz ..10 Khz  as RF setting, BUT I didn't check if prescaler was 32 !

    so I don't know what happens ..

    thank for your great help

    Francois

Children
No Data