I have one EKIT01-HMC767LP6CE and now i need to configure the KIT runned in 1-Way Sweeps Mode with detailed values:
Could you help me config KIT01-HMC767LP6CE runned with that values. Please send me all values of register after you configured.
I've attached a spreadsheet to help configure the sweep. I've entered into the spreadsheet Fpd, start frequency, stop frequency and sweep time. The spreadsheet has calculated:
Initialize the HMC767 to lock onto the start frequency. Use the detailed GUI to program the spreadsheet values than set Reg 0x06 to 1-way sweep mode. Apply a trigger either using the trig pin or through SPI trig (Reg 0x0E=1). The HMC767 will sweep from the start frequency to the stop frequency.
im trying to generate a single tone frequency of 8.1 Ghz and a sweep of 1Ghz (BW) by programming the HMC767 in hmc767 mode through SPI communication. I'm using STm32 nucleo board for programming purpose.
can u please guide me on this of how to program hmc767 using SPI and what register i need to configure , what steps i have to follow while programming. my controller can send only 16 bit data in one go while the hmc write operation tells me to use 32 bit data format. please help me with register value and some programming suggestion for above configuration..