I wanted to Simulate the HMC392A in Microwave office. So i downloaded its S2P file from design resources and as i performed simulation its responses like return loss is better than the datasheet but its gain is decreased to max15.7 dB after simulation whereas it is better than17dB in datasheet. please check and clear me.
The most important thing is this S2P file didn't included Noise figure data. How can i get this data. for 5v/60mA and 5v/30 mA biasing.
The s2p file given on the product page has s21 values larger than 17dB between 3.5 to 7 GHz.
HMC392A-Die Datasheet and Product Info | Analog Devices
Standard s2p file format does not contain noise information. There may be files that has the noise information for various RF products, but that is not the standard s2p file format. In general, you can extract the noise information from the datasheet plots and add that to the s2p file manually, if needed.
For this case, pleaselso refer to the attached spreadsheet which contains s-par data with noise data at 38 mA and 26 mA at 5V.