Configuration of TX Inputs for MAX2830

Question

Hello, 
 I plan on using the MAX2830 for a custom TX/RX pair for wireless audio applications, but im concerned if the chip can accept 0-20kHz on its TX pins. Does anyone with experience using this chip know if I can feed low frequency analog into it?

JoeAS · Accepted Answer

The MAX2830 has a LPF in the TX path and HPF/DC Offset Correction in the RX path. The TX should have no issues handling signals in the audio range, but the RX path HPF has a 100 Hz corner frequency, which will attenuate signals in said range. Even if the TX/RX paths could handle those frequencies, I do not recommend using the MAX2830 for this application, as it is intended/optimized for use with the 802.11 standard. Any audio signal you feed to this part may end up distorted as a result.)

JoeAS · Answer

Closing this thread due to lack of activity.

Popular Forums

Product Forums

Application Forums

Design Center Forums

Highlighted Webinar

Places

Libraries

Latest Webinars

Challenge Yourself!

What's Brewing

Places

Resources

Highlighted Blogs

Latest Blogs

ADI Blogs

Visit ContentZone

Featured Content

View Content By Industry

View Content By Technology

Products Mentioned

Thread Details

Configuration of TX Inputs for MAX2830

Thread Summary