Relative phase data of HMC1119

Hi Akira,

this data is in the S-parameter files. Download the zip file of s-parametrs and you will see that there is a separate file for each attenuation state. the input to output phase (S21ang) is the 5th column, after Frequency, S11mag, S11ang and S21mag. This data is in degrees. If you want to make a plot of phase vs attenuation state at 3.5 GHz, then you need to go into each file, navigate to the 3.5 (GHz) row, and take the fifth piece of data from the left. For example, for the 0.5dB file, that data point would be -66.81 degrees. 

Best Regards

Eamon

Hi Akira,

here is the data. In order to make the file size smaller, I decimated the data down so that the frequency steps are large. In the attached file the data is filtered down to 3.5 GHz at 3.3V. However there is data in there from 10 MHz to 6 GHz and also for a supply voltage of 5V. There is data in there for 10 devices. 

Best Regards

Eamon 

XLSX