Tuning time of ADMV8052

Hi Uroosa,

1. If you are in interpolation mode, the interpolation coefficients you set won't change when you shift from one Fc to another. These will be fixed, but the FC_Load value will change depending on the Fc you choose.

2. For Tuning time, Amplitude settling time would be <10us and for Phase Settling Time it would be <15us.

Regards,

Jake

Hi Uroosa,

1. If you are in interpolation mode, the interpolation coefficients you set won't change when you shift from one Fc to another. These will be fixed, but the FC_Load value will change depending on the Fc you choose.

2. For Tuning time, Amplitude settling time would be <10us and for Phase Settling Time it would be <15us.

Regards,

Jake

thankyou so much but as for interpolation coefficients if we use different bandwidth like (7%, 9% or 11%) so every fractional bandwidth has its own coefficients. Am wrong or right? secondly do we have to send coefficients of all bands or only one selected band....

Hi Uroosa

1. Yes, each Bandwidth setting has its own coefficients.

2. Do you mean if the Bandwidth setting will affect all the Filter Bands? Once you write the Bandwidth coefficients, you can use it on all the Bands.

You can freely change the coefficients before switching to the next desired Filter settings.

Regards,

Jake

Thankyou so much Jake!

Regards

Uroosa Iftikhar