Post Go back to editing

Envelope Vs RMS

Category: Datasheet/Specs
Product Number: LTC5582

What is different between Envelope and RMS power detector?

Parents
  • The RMs detector converts the thermoelectric effects of the RF signal into a voltage. Basically output voltage would correspond to the temperature as the matched load heats up. The envelope detector tracks the envelope of the modulated RF signal. Usually, the envelope detector has a larger bandwidth, a wider frequency range, and a higher dynamic range. On the other hand, accuracy and temperature stability are important for RMS detectors. if you known modulation type there is a clear relation between peak power (max. value of envelope power values) and RMS power. 

Reply
  • The RMs detector converts the thermoelectric effects of the RF signal into a voltage. Basically output voltage would correspond to the temperature as the matched load heats up. The envelope detector tracks the envelope of the modulated RF signal. Usually, the envelope detector has a larger bandwidth, a wider frequency range, and a higher dynamic range. On the other hand, accuracy and temperature stability are important for RMS detectors. if you known modulation type there is a clear relation between peak power (max. value of envelope power values) and RMS power. 

Children

Before You Switch


Switching languages will make ADI Explorer unavailable. Resume your session by switching back to English and reopening ADI Explorer.