Hi,
In the data sheet of HMC798ALC4 the thermal resistance of junction to ambient and junction to case are about the same (120C/W vs. 119C/W).
This does not make any sense. Is it a mistake?

Thanks,
Vadim.
KCC's Quizzes AQQ305 about a mutual exponentiation equation
1. Quote of the month: "A train station is where a train stops. A bus station is where a bus stops. I have a work station on my desk, so..." - unknown
2. Quiz AQQ305 about finding a mutual exponential equation
Good luck, and try to be among the
View All
October Monthly Blog Quiz! Read the blog, take the quiz, and you could win a gift card
Finding Your Circuit Chi — EMC Quiz!
Think you know EMC? Test your knowledge with our 5-question quiz!
Read the blog first, then take the challenge: Finding Your Circuit Chi
Every current flowing creates electromagnetic fields.
Strong EMC design
View All
HMC798A
Recommended for New Designs
The HMC798ALC4 is a 24 GHz to 34 GHz subharmonically pumped (×2) MMIC mixer with an integrated LO amplifier housed in a leadless, RoHS compliant LCC package...
Datasheet
HMC798A on Analog.com
Hi,
In the data sheet of HMC798ALC4 the thermal resistance of junction to ambient and junction to case are about the same (120C/W vs. 119C/W).
This does not make any sense. Is it a mistake?

Thanks,
Vadim.
Hi Vadim,
Yes, this is a mistake and the theta JC value for this component is incorrect. Are you looking for both values?
Hi Jonathan,
Thanks for the response. I need just the JC value. Do you have the correct value?
Hi Jonathan,
Thanks for the response. I need just the JC value. Do you have the correct value?
Hi Vadim,
I heard back from the designer of the component and the appropriate theta JC value is 150 deg C.
Thanks, Jonathan, but 150 degC is a temperature, not thermal resistance.
I need the theta JC (in units of °C/W).
Can you please double-check? Thank you.
Hi Vadim,
Nice catch :) I'll look around some more and try to get you the appropriate thermal resistance values.
Best,
Jonathan
Hi Jonathan,
Any news?
Best regards,
Vadim.
Hi Vadim,
I've put in a request for the thermal parameters of the HMC798A to be remeasured and will send you an update once those arrive.
Best,
Jonathan
Thanks Jonathan,
I will wait.