Tiny rad GUI

Question

Hello team , we are looking forward to purchase MMIC EVALUATION BOARD 24GHZ for our radar communication 
 And plan is to connect to own antenna 
 But we are expecting tiny rad GUI for the our radar verification. 
 tiny rad output GUI will detect the MMIC EVALUATION BOARD ? 
 Can you please suggest the feasibility for this?

emrecangidik · Accepted Answer

Hi Venkateshp3 , 
 TinyRad GUI will not recognize the EVAL-RADAR-MMIC board as TinyRad is a complete 24GHz FMCW radar solution with 2TX, 4RX, ADC, and DSP modules. 
 While TinyRad is a complete module, the EVAL-RADAR-MMIC evaluation board only contains only ADF4159 24GHz Ramping Engine+PLL, ADF5901 2 Channel transmitter, and ADF5904 4 Channel receiver. ADC and DSP module is not present on EVAL-RADAR-MMIC. 
 There is an SDP-S or SDP-B USB Bridges that can be purchased together with an EVAL-RADAR-MMIC board. This enables communication between the EV-RADAR-MMIC software and the EVAL-RADAR-MMIC Board. 
 SDP-S Link: SDP-S Evaluation Board | Analog Devices 
 EV-RADAR-MMIC Software Link: https://www.analog.com/media/en/evaluation-boards-kits/evaluation-software/EV-RADAR-MMIC_.zip 
 
 By the way, the SDP-B platform can also communicate with the EV-ADAR7251 Evaluation Board and EVAL-RADAR-MMIC Board. Using these three evaluation boards and the following software, you can control a 24GHz signal chain and get raw ADC output so you can process it by Matlab or Python on your computer. 
 SDP-B Link: SDP-B Evaluation Board | Analog Devices 
 EV-ADAR7251 Link: EVAL-ADAR7251 Evaluation Board | Analog Devices 
 ADI Radar GUI: download.analog.com/.../AutomotiveRadarFrontendConfigurator-Rel3.1.0_OBJ.exe Thanks, 
 Emrecan)

emrecangidik · Answer

Hi, 
 Unfortunately, TinyRad GUI cannot recognize the EVAL-RADAR-MMIC. 
 Thanks, 
 Emrecan

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

Tiny rad GUI