adrf5046 mos射频开关烧毁原因 - Translation: Causes of RF switch burning

Question

Translation: 
 The switch shunt RF1 is used as the input interface, and the combination RFC is used as the output interface. It is in an open state, so what is the maximum input power tolerance? What is its burning mechanism?

开关分路RF1作为输入接口，合路RFC作为输出接口，处于开路状态，那么输入最大功率容限为多少？其烧毁机制是什么？

yus · Accepted Answer

ADRF5046 has power handling of 27 dBm at through path. In case you left one of the selected RF channel open the RF input power should be derated 6 dB considering the worst case. We can give better assessment if 6 dB derating is not good for your application. In that case please write the RF power you need at RF input. Also please see the application note below regarding non ideal RF loads. AN-2558: RF Switch Performance with Arbitrary Loads | Analog Devices)

Partner Forums

Partner Libraries

Products Mentioned

Associated Drivers

adrf5046 mos射频开关烧毁原因 - Translation: Causes of RF switch burning