I am trying to view the 800 Hz tone of the MMIC2 EVAL board with the setup described as in the user manual. I can't seem to replicate the plot shown in the evaluation window successfully in MATLAB. I exported the data as a CSV file, read this into MATLAB and took the FFT. The power on the y-axis is off and i am unable to narrow the window enough to view the 800 Hz peak. Any help would be greatly appreciated.
regards,
Al
Hi, sorry for the delay on this. As you may have seen in some older threads, we can't supply the source code for the ADI Radar Platform program. I'm not sure what your code is missing in terms of processing the raw data. But I've attached app notes we have for our DemoRad/TinyRad kit which describes some of the processing that's implemented in these radar kits, the code examples might give you some assistance for your Matlab processing.
Hi, sorry for the delay on this. As you may have seen in some older threads, we can't supply the source code for the ADI Radar Platform program. I'm not sure what your code is missing in terms of processing the raw data. But I've attached app notes we have for our DemoRad/TinyRad kit which describes some of the processing that's implemented in these radar kits, the code examples might give you some assistance for your Matlab processing.
