LTC5596 with evaluate software version

It looks like there are two issues going on. First, in the Arduino IDE, go to the Sketchbook: File->Sketchbook->Utilities->DC590B and upload the DC590 emulator sketch onto your Arduino. Second, just go ahead and use a direct link for the LTC5596 module:
https://ltspice.analog.com/quikeval/ins5596.msi
After installing you will have an item under Analog Devices in your start menu that you can use to start the module directly.

It looks like there are two issues going on. First, in the Arduino IDE, go to the Sketchbook: File->Sketchbook->Utilities->DC590B and upload the DC590 emulator sketch onto your Arduino. Second, just go ahead and use a direct link for the LTC5596 module:
https://ltspice.analog.com/quikeval/ins5596.msi
After installing you will have an item under Analog Devices in your start menu that you can use to start the module directly.

jeremy.sorensen said:

go ahead and use a direct link for the LTC5596 module:
https://ltspice.analog.com/quikeval/ins5596.msi

Hi  Jeremy,

Thanks for your suggestions.

After I follow your comment to upload the DC590 emulator and it also appear first issue from Bad Linduion Sketch error message.

By the way, I upload the emulator DC590 in sketchbook shows the "DC590B", is it correct?

Thanks.