Post Go back to editing

ADF5356-Issues with frequencies above 4 GHz

Hi there,

I was just testing out a custom ADF5356 board and was experiencing significant power loss after 4 GHz.

The custom board is essentially a copy of the evaluation board, with a few minor differences to fill a different need. There are 2 points I am interested in:

1--> @4.8GHz

2--> @roughly 9.5GHz

The power reading @ 4.8GHz is similar to that experienced by the evaluation board, but the power reading @ 9.5GHz jumps from -9DBm (eval board) to -24dbm (custom board). I have been trying to perform a number of troubleshooting procedures to try and identify what the problem is and whether or not the chip used is faulty or if there is a problem on my end.  

I have already ensured that the register 6 settings are as they should be and was hoping you might be able to give me more insight on this problem. I can include more details on the board itself if you are interested. 

I have gone through various forums and have found others with 'similar' issues and I have tried to ensure that those were either tested by us or had already been accounted for.

Thank you very much,

Any help on the matter would be greatly appreciated

Parents Reply Children