LTC5596 with linduino board

hi,

please make sure the quikeval is installed with all the necessary drivers for the PC to communicate with linduino board if you want to write your custom code.

another way is the get the DC2870A-kit, it comes with the firmware code pre-loaded.

https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/DC2870A.html#eb-overview

regards,

Andy

hi,

please make sure the quikeval is installed with all the necessary drivers for the PC to communicate with linduino board if you want to write your custom code.

another way is the get the DC2870A-kit, it comes with the firmware code pre-loaded.

https://www.analog.com/en/design-center/evaluation-hardware-and-software/evaluation-boards-kits/DC2870A.html#eb-overview

regards,

Andy

Hi

I have installed quickeval with aa necessary drivers for PC to communicate with linduino board.

I have LTC5596 which has part number DC2158A. And this DC2158A part number is not shown in Arduino IDE. 

Please guide me how should I get this part number in Arduino IDE?

Also guide me the procedure how to connect the linduio board(DC2026C) to LTC5596 and when to open quick eval?

Waiting for your response.

Thank you. 

Hello

Please reply as soon as possible.

Thank you.