Decoupling network for HMC943APM5E

Hi - The HMC943APM5E datasheet shows a requirement for 3 decoupling caps per qty. 8 Vd and qty. 2 Vg pins; that is a total of 30 capacitors.  Do you have any recommendations for a simplified decoupling network that will result in performance that meets the datasheet performance (including over temp).  For example, tying all pins at the device and bulking up capacitance in less overall capacitors?

Thanks!



Tagged full PN
[edited by: EZADI_123 at 6:12 PM (GMT 0) on 9 May 2020]