Can I use HMC465LP5 for signal that have bandwidth 1 kHz - 10 GHz? Is HMC465LP5 able to work with signal frequencies below 10 MHz?
Yes, The HMC465 will operate at 1 KHz. You will need to add capacitors to the ACG pins to extend the frequency lower. The datasheet has a plot showing performance fro 30 KHz to 10 GHz.
Hi Jim!Thanks for the answer.Which inductance coil can I use in the bias tee for signal that have bandwidth 1 kHz - 10 GHz?
You will need to create a broad band bias network using several inductors. With one of these broadband inductors from coil craft you can cover from 10 MHz to 10 GHz.https://www.coilcraft.com/prod_bbind.cfm
Hi Jim!What values will P1dB and Gain accept at 1kHz-30kHz frequencies? Please provide information on P1dB and Gain at 1 kHz-30 kHz.
Due to equipment limitations, 10MHz, I can't provided the requested data.
Amplifier works at frequencies of 1 kHz-30 kHz or not? How can I use it if information is not presented at low frequencies? You said the amplifier was working. Will the power output be 23dBm and Gain 15dB at 1kHz-30 kHz?