Application Circuit Required

Hi Abdul,

                I do not have an application circuit for the requested frequency range. I will need approximately 3 weeks to develop this circuit.

Regards,

Jim B

Thank you so much for you reply.

Dear can you please develop the application circuit and recommended component list for requested frequency range. If you can develop it as soon as possible it will be very effective.

Looking for your response.

Best Regards:)

Hi,

I am going to work on HMC789 so I would need your target specs for Gain, RL, P1dB amd IP3?

Regards

Ivan

Following are the parameter for HMC789 :  

Gain: 18-20 dB

P1db: +25 dB

IP3:  +42 dBm

RL: 20 dB

NF : 3.8 dB

Hi Abdul,

              What are your target specs for the ADL5320?

Regards,

Jim B

Dear same specs gain could be 20-21db  with same frequency band as mentioned above.

Dear gain flatness should be as less as possible.

Thanks:)

- Is this input or output RL?

- Do you have room to lower specs, some trade off, for example Gain P1dB?

Regards

Ivan

This is output return loss.

Input return loss is 12db.

Dear these specs are the same as you given in the datasheet for other bands.

P1db shoulb be 25 db.

Gain can be 1,2 db lower as i mentioned above.

Thanks:)

abdul.rasool@gmail.com said:

houlb be 25 db.

Hi Abdul,

Can you tell us about  more details about opportunity? What is company name doing this design?

Reason I am asking is because we might be able to find other part fitting your design target.

Thanks

Ivan 

abdul.rasool@gmail.com said:

houlb be 25 db.

Hi Abdul,

Can you tell us about  more details about opportunity? What is company name doing this design?

Reason I am asking is because we might be able to find other part fitting your design target.

Thanks

Ivan 

Our company name is aksa-sds. Aksa-sds is a design house providing engineering solution.