On 15th August 2016, you answered a question from Wave_X about how to program the eeprom that the ADI PLL programming GUI uses to believe it's connected to EV-ADF5355SD1Z:
- Download and install: ftp://ftp.analog.com/pub/evalcd/SDPEEPROMProgrammer.zip
- Run the programmer.
- Connect SDP board to
computer via USB. Connect PLL board to the SDP board.
- Copy the settings in the
screenshot below and click Write File to EEPROM.
- You should get a 'Programming Successful' message. (Sometimes you have to click the button twice
to get the message.)
- [Remove PLL board and replace with next board. Repeat 4 – 6. Don’t disconnect the SDP board or hit
the reset button.]
I have tried to access ftp://ftp.analog.com/pub/evalcd/SDPEEPROMProgrammer.zip but can't. Is it still available & if so, how do I access it.
Secondly, I could not see the screen shot of the settings that the EEPROM should be programmed to for this board. Can you send me the details please.