Request for data behind plots in datasheets

I’d like to calculate the frequency dependent noise figure and OIP3 of a composite system I am simulating. Would it be possible to get the raw data behind the follow plots from the following datasheets?

  • HMC1049LP5E Rev. B
    • Figure 14. Noise Figure vs. Temperature
    • Figure 18. Output IP3 vs. Temperature
  • HMC1126 Rev. C
    • Figure 21. Output IP3 vs. Frequency for Various Temperatures, POUT = 0 dBm/Tone
    • Figure 28. Noise Figure vs. Frequency at Various Temperatures
  • HMC-AUH312 Rev. E
    • Figure 14. Noise Figure
    • Figure 17. Output IP3 vs. Frequency at Various Temperatures, POUT = 0 dBm per Tone
  • ADL7003 Rev. 0
    • Figure 20. Noise Figure vs. Frequency at Various Temperatures
    • Figure 32. OIP3 vs. Frequency at Various Temperatures

Thanks,
pdev