Post Go back to editing

ADF4350 and ADF4351 software and USB microcontroller firmware source codes

The source codes for the ADF4350 and ADF4351 evaluation board control software and the evaluation board USB microcontroller firmware are attached below.

Warning: You use this at your own risk and it is not officially supported by Analog Devices.

  • adf4xxx_usb_fw_1_0 is the USB  microcontroller firmware source code.The code is written in C and the project opens in Keil uVision.
  • ADF435x_Source_Code_vx_x_x is the ADF4350 and ADF4351 evaluation board control software source code. The code is written in C# and the project opens in Microsoft Visual Studio. You can get a free version of Microsoft Visual C# 2010 Express here: http://www.microsoft.com/visualstudio/eng/downloads#d-2010-express

Post any questions below.

Compiled, release download here: https://ez.analog.com/message/38857

attachments.zip
Parents
  • Thanks. I have posted it as you suggested.

    in the adf4350 sw I get the message : No USB adapter board attached. Try unplugging and re-plugging the USB cable. when I try to conect to the BF548 target.

    In the device manager I can see the Blackfin BF548 USB device connected.

    any advise why?

Reply
  • Thanks. I have posted it as you suggested.

    in the adf4350 sw I get the message : No USB adapter board attached. Try unplugging and re-plugging the USB cable. when I try to conect to the BF548 target.

    In the device manager I can see the Blackfin BF548 USB device connected.

    any advise why?

Children
No Data