uncalibrate the output power of cn0511

Hello EKO, sorry for the late response, we're working on a solution for your CN0511 issue. Thank you for your patience.

May I know what setup you are using? Is it through pyadi-iio or iio oscilloscope? 

If you're using pyadi-iio, you can check this repository GitHub - analogdevicesinc/libad9166-iio, specifically the "ad9166.c" file. Since the code was calibrated, you can set to zero or any value based on your application.  

However, if you're using IIO oscilloscope, set to debug mode and select ad9166 as your device, set the following IIO device attributes (refer to the image below) to see the raw value and change it based on your application.

Regards,

-Rey

Hello Rolmedo,

Sorry for the delayed response. the ad9166.c  file will be incredibly useful for my project , and I want to express my sincere gratitude. Thank you very much!

Best regards,

Eko

Hello EKO ,

May I know how you edit the file? I suggest clone the repository first and edit it on the IDE you are using. 

Regards,

Rey