The MAX20734 has 4 output current settings; 0, 1, 2, 3 and 4. In EESIM you chose which setting you want to use in the 'Programmable Parameters' tab. These settings are detailed in the Electrical Characteristics table in the datasheet. The allowable maximum output current varies between each setting. Also there is a minimum, typical and maximum value for each setting. The maximum output current you can set a MAX20734 design to in EESIM is 38A across all settings. This is the typical value of 'Setting 3', where the maximum in the EC table is over 40A. EESIM however, only accounts for the typical specifications.